Brooks Instrument 5882/92 - Manual (Page 3)

3
Installation and Operation Manual
X-TMF-FM-MFC-eng
PN 541-C-007-AAG
April, 2008
Flomega, Liquid MFC’s/MFM’s
Pressure Equipment Directive (PED)
All pressure equipment with an internal pressure greater than 0,5 bar (g) and a size larger than 25 mm or 1" (inch)
falls under the Pressure Equipment Directive (PED). The Directive is applicable within the European Economic Area
(EU plus Norway, Iceland and Liechtenstein). Pressure equipment can be traded freely within this area once the
PED has been complied with.
** Appendix 1 of this manual contains important safety and operating instructions related to the PED directive
** Meters decribed in this manual are in compliance with EN directive 97/23/EC module H Conformity Assessment.
** All Brooks Instrument flowmeters falls under Fluid-group I
** Meters larger then 25mm or 1" (inch) are in compliance with category I, II or III of the PED.
** Meters of 25mm or 1" (inch) or smaller are Sound Engineering Practice (SEP).
Essential Instructions
Read this page before proceeding!
Brooks Instrument designs, manufactures and tests its products to meet many national and international
standards. Because these instruments are sophisticated technical products, you must properly install, use
and maintain them to ensure they continue to operate within their normal specifications. The following instruc-
tions must be adhered to and integrated into your safety program when installing, using and maintaining
Brooks Products.
• Read all instructions prior to installing, operating and servicing the product. If this instruction manual is not
the correct manual, please see back cover for local sales office contact information. Save this instruction
manual for future reference.
• If you do not understand any of the instructions, contact your Brooks Instrument representative for
clarification.
• Follow all warnings, cautions and instructions marked on and supplied with the product.
• Inform and educate your personnel in the proper installation, operation and maintenance of the product.
• Install your equipment as specified in the installation instructions of the appropriate instruction manual and
per applicable local and national codes. Connect all products to the proper electrical and pressure sources.
• To ensure proper performance, use qualified personnel to install, operate, update, program and maintain the
product.
• When replacement parts are required, ensure that qualified people use replacement parts specified by
Brooks Instrument. Unauthorized parts and procedures can affect the product’s performance and place the
safe operation of your process at risk. Look-alike substitutions may result in fire, electrical hazards or
improper operation.
• Ensure that all equipment doors are closed and protective covers are in place, except when maintenance is
being performed by qualified persons, to prevent electrical shock and personal injury.