Brooks Instrument 5882/92 - Manual (Page 11)

11
Installation and Operation Manual
X-TMF-FM-MFC-eng
PN 541-C-007-AAG
April, 2008
Flomega, Liquid MFC’s/MFM’s
2-4 Return Shipment
Prior to returning any instrument to the factory visit the Brooks website
www.BrooksInstrument.com for a Return Materials Authorization Number (RMA#), or contact one of the
following locations:
Brooks Instrument
407 W. Vine Street
P.O. Box 903
Hatfield, PA 19440 USA
Toll Free (888) 554-FLOW (3569)
Tel (215) 362-3700
Fax (215) 362-3745
E-mail: [email protected]
www.BrooksInstrument.com
Brooks Instrument Brooks Instrument
Neonstraat 3 1-4-4 Kitasuna Koto-Ku
6718 WX Ede, Netherlands Tokyo, 136-0073 Japan
P.O. Box 428 Tel 011-81-3-5633-7100
6710 BK Ede, Netherlands Fax 011-81-3-5633-7101
Tel 31-318-549-300 Email: [email protected]
Fax 31-318-549-309
E-mail: [email protected]
Instrument must have been purged in accordance with the following:
All flow instruments returned to Brooks requires completion of Form RPR003-1,
Brooks Instrument Decontamination Statement, along with a Material Safety Data Sheet (MSDS) for
the fluid(s) used in the instrument. Failure to provide this information will delay processing by Brooks
personnel. Copies of these forms can be downloaded from the Brooks website
www.BrooksInstrument.com or are available from any Brooks Instrument location listed above.
2-5 Transit Precautions
To safeguard the instrument against transportation damage, it is recommended to keep the instrument
in its factory container until ready for installation.
2-6 Removal from Storage
Upon removal of the instrument from storage, a visual inspection should be conducted to verify its "as-
received" condition. If the instrument has been subject to storage conditions in excess of those
recommended (See Section 2-3), it should be subjected to a pneumatic pressure test in
accordance with applicable vessel codes.
Section 2 Installation