Brooks Instrument 5861i - Manual (Page 8)

1-2
Installation and Operation Manual
X-TMF-5861i-MFM-eng
Part Number: 541B111AAG
November, 2008
Brooks ® Model 5861 i
Section 1 Introduction
Power Requirements
+15 to +28Vdc @ 90 mA
2.5 watts power consumption max.@28 volts
Ambient Temperature Limits
Operating: 5 to 65°C (40 to 150°F)
Non-Operating: -25 to 100°C (-13 to +212°F)
Working Pressure
1500 psi (10.34 MPa) maximum
Output Signal
0-5 Vdc into 2000 ohms or greater. Maximum ripple 3 mV.
Jumper selectable 4-20 mAdc or 0-20 mAdc. Refer to Figure 2-3 for
maximum allowable loop resistance.
Temperature Sensitivity
Zero: Less than ±0.075% F.S. per degree C
Span: Less than ±1.0% F.S. shift over 10-50° C range
Pressure Sensitivity
0.03% per PSI up to 200 PSIG
Power Supply Sensitivity
±0.09% full scale per % power supply voltage variation
Mounting Attitude Sensitivity
±0.5% maximum full scale deviation after re-zeroing
Leak Integrity
1 x 10
-9 Atm. scc/sec Helium
Usable Range
50 to 1
Mechanical Connection
Refer to Figure 2-1.
Electrical Connection
D-type, 15 pin male connector (DA-15P)
Refer to Figure 2-2.