eLine Technology iVMS-2000 V2.0.2 User Manual
Page 95
iVMS-2000 User Manual
90
linkage afterwards.
Note: For iVMS-2000 PC-DVR edition, there is no “Intercom exception” or “live
preview exception” type.
[Arm Schedule]
Arm schedule for alarm linkage is set as 24-hour mode by default and the
configuration steps for arm schedule is basically the same as record schedule settings.
Users can set up to 8 arm periods for each day (Figure 6-30).
Figure 6-30 Arm Schedule Configuration for Alarm Linkage
[Record]
Click [Enable] and set pre-record / post-record time, and select recording camera(s)
to set camera recording for alarm linkage (Figure 6-31).
Figure 6-31 Alarm Record Configuration
[PTZ]
Click [Enable] and set PTZ event for alarm linkage (Figure 6-32).
Select PTZ cameras and alarm link type (Preset/Patrol/Pattern) and select the
preset/patrol/pattern which should be linked to the alarm accordingly. Users can also set
a preset position to be returned to after alarm linkage event, and also duration time
before returning.