eLine Technology iVMS-2000 V2.0.2 - Manual (Page 78)

iVMS-2000 User Manual
73
Network settings is for configuration of network parameters.
Parameters Description
Network ID Network ID to identify the software in the network, the
default network ID is iVMS-2000(local host name)
Network [Network] is enabled by default to allow client software and
IE client connection. If [Network] is disabled, then the client
software or IE client cannot connect to this iVMS-2000 server.
Client Port The iVMS-2000 server port for client connection, which can
be set between 2000~65534 (default port: 8000)
Maximum
Connections
Maximum camera connection number via network, which can
be set between 5~128 connections (default maximum
connection: 128)
Alarm Server IP Alarm info will be upload to this alarm server IP
Port Port number for the alarm server
Synchronize at Synchronize the time of all the IP cameras according to
iVMS-2000 server. This option is disabled by default, and
users can set the synchronize time at certain hour of a day.
Now Click [Now] button to synchronize all the IP cameras at once
Enable DDNS Enable/Disable DDNS
DDNS Protocol DDNS protocol: DYN DNS / PeanutHull
Domain Name Domain name registered on DDNS server
Server IP DDNS server address
Port DDNS server port
User Name User name for the DDNS domain name
Password Password for the DDNS domain name
Note: Users need to click [Save] button after parameter modification to save the
Network configuration, and the modification of some parameters would require
iVMS-2000 software reboot before taking effect.
Note: i
VMS-2000 PC- DVR edition does not support synchronization
functions (“Synchronize at” and “Now” button listed above).