6 ptz control, 2 full screen mode, 3 stop all cameras’ in live preview – eLine Technology iVMS-2000 V2.0.2 User Manual
Page 32: 4 enable manual record on all cameras, 5 start auto switch, 6 enable/disable live audio
iVMS-2000 User Manual
27
3.5.2 Full Screen Mode
: Click the button to enter full screen mode, the button appears
after clicked.
Click the button again to exit full screen mode.
3.5.3 Stop All Cameras’ in Live Preview
: Click the button to close all active windows.
3.5.4 Enable Manual Record on All Cameras
:
Start Manual Recording for all cameras which will not stop until the button is
pressed again. The button looks like this
when recording is in progress.
3.5.5 Start Auto Switch
:
Click the button to start auto switching by cameras or groups. Select switch mode
by pressing
.
Switch by cameras: Start auto switching by cameras according to current live preview
layout. Switching duration can be set in
6.1 General Setting
.
Switch by groups: See
3.3.2 Cycle live preview of group
. This provides the same
functionality as cycle live preview of group.
The button looks like this
when switching is active. Press the button again to exit.
3.5.6 Enable/Disable Live Audio
: Press the button to enable live audio. When pressed the button should change to
;
: After enabling live audio, you can adjust volume by using the slider.
3.6 PTZ Control
Press on
in main console to open PTZ control
panel as shown in Figure 3-20.