eLine Technology iVMS-2000 V2.0.2 - Manual (Page 89)

iVMS-2000 User Manual
84
1. Click [Delete] / [Delete All] to delete current record schedule;
2. Click [Motion] / [Schedule] to select record mode;
3. Drag the mouse in each day’s time bar to add record schedule (support up to 8
pieces of time schedule per day), and each pieces of time schedule can be
modified in position and length, users can also copy the time settings to the
whole week;
4. Click [OK] to complete the record schedule settings.
Select relative camera in the drop-down list of [Camera Name] to switch to this camera’s
record schedule settings.
Click [Setup] in [Motion Detect Area] to set motion detect area.
Click [Setup] in [Encoding Parameters] to set encoding parameters for the camera
(Figure 6-21).
Figure 6-21 Encoding Parameters Configuration
Users can select [Customized] or [Template] mode for record schedule setup:
[Customized]
Users can set pre-record time and post-record time under [Customized] mode. Click
[Motion] or [Schedule] to select the record mode for each time period, and then drag the
mouse and draw time schedule on the time bar, and it supports up to 8 record periods per
day. Select a certain record period and click [Delete] to delete this record period, or click
[Delete All] directly to delete all the record period settings for this camera. Click on any
of the weekly date to select 24-hour of this day, and click [Copy Schedule to] to copy the
record period settings to other days.
[Template]
Under [Template] mode, users can select record schedule templates which are
already edited, or click [Edit Template] to enter Record Schedule setting dialog box.
[Copy Schedule to]
Copy the record schedule settings to other cameras.
6.5.2 Modify Recording Schedule
Select a record schedule and click [Modify] or double click on it to enter Record Schedule
setting dialog box (Figure 6-22) and modify the record schedule.