4 reboot cameras, 5 enable/disable cameras – eLine Technology iVMS-2000 V2.0.2 User Manual

Page 85

iVMS-2000 User Manual

Figure 6-14 Delete IP Cameras

Note: Analog cameras cannot be deleted.

6.3.4 Reboot Cameras

Select one or multiple IP Cameras on the IP Camera list, and click [Reboot] to reboot the

selected IP camera(s). iVMS-2000 will automatically re-connect all the selected IP Cameras
after rebooting.

Note: Analog cameras cannot be rebooted.

6.3.5 Enable/Disable Cameras

Select an analog camera on the IP Camera list, and click [Disable] to disable this camera,

users can click [Enable] again to enable this camera afterward.

Note: IP cameras cannot be enabled or disabled.