Draw-Tite 59600 ROOF TOP SKI CARRIER User Manual
Page 2
Product Code:
Product Name:
www.rolaproducts.com
59600N Rev B 0807
59600
Roof Top Ski Carrier
Cequent Towing Products - Plymouth, MI
Technical Service: (888) 521-0510
Please read all instructions carefully before assembly, installation and/or use of this product.
1
ASSEMBLE SKI CARRIER
•
Attach the top mounting clamp to the ski carrier
with the 6 mm x 90 mm long screws.
•
Tighten screws using the 5 mm hex wrench
provided.
Hex wrench
6 mm x 90 mm
long screw
Ski carrier
Top mounting clamp
2
ATTACH SKI CARRIER
•
To attach ski carrier to vehicle cross-bar, place ski
carrier on top of cross-bar and install the bottom
clamp around bottom of cross-bar and secure with
the 6 mm x 40 mm long screws.
•
Center the ski carrier and tighten screws using the
4 mm hex wrench provided.
•
Adjust cross-bars to fit skis or snowboards.
(30” approximately).
1.00”
MAX.
Page 2
3
CROSS-BAR
30” approx.
MINIMUM 3 THREADS
PAST HEX NUT
SIDE VIEW OF MOUNTING CLAMP
LOADING SKIS OR SNOWBOARDS TO CARRIER
•
Open ski carrier and load skis into carrier with tips
facing to the rear.
See step 4 for mounting options
•
To close the carrier, push the hood down firmly
until it engages the latch.
•
Use key to lock both ski carrier hoods.