Draw-Tite 4457 GOOSENECK RAIL KIT - Manual (Page 5)

Equipment Required:
Fastener Kit: 4457F
Wrenches: 3/4, 15/16, 10mm
Drill Bits: 1/4”, 1/2”, 5/8”
Other Tools: Drill, Reciprocating Saw, Tape
WARNING: Under no circumstances do we recommend
exceeding the towing vehicle manufacturers recommended vehicle
towing capacity.
Vehicle Forward
Installation Instructions
GOOSENECK RAIL MOUNTING KIT
Dodge Ram 2500/3500 Heavy Duty
Short & Long Bed, All Megacabs
Part Numbers:
4457
6300/8339 GOOSENECK HITCH INSTALLATION
If using with 9464 or 9474 under bed gooseneck hitches go to and use Pages 1-4 only.
5/8” Fasteners from
Hitch Fastener Kit
All Fasteners Typical, Both Sides
Figure 6 .
z 2012, 2013 Cequent Performance Products Sheet 5 of 8 4457N 5-8-13 Rev. B
After installing
bracket, reattach
ground wire
Torque all 5/8” nuts to 150 ft.-lb. (203 N-m)
Item 1 Figure 6. and 5/8” hex nuts Figure 9.
Qty. (6) Hex Nut, 5/8”-11 GR.8, (2) not used with this head. Qty. (2) Block, 1/4” X 1.00 X 3.00
Qty. (4) Lock Washer, 5/8” Qty. (1) Cable Tie (not shown)
Qty. (4) Flat Washer, 5/8” Qty. (4) Shims, 1” x 2”
Qty. (10) Hex Nut, 1/2”-13 Qty. (2) Carriage Bolt, 5/8-11 GR.8 not used see Figure 1. Page 1.
Qty. (10) Conical Toothed Washer, 1/2” Qty. (2) Conical Toothed Washer, 5/8” not used see Figure 1. Page 1.
Qty. (4) U-Bolt, 1/2” Qty. (2) 1/2” Wire Pulls, (for fish-wiring)
Qty. (2) Carriage Bolt, 1/2-13 GR.5 Another fine “Cequent Performance Products” hitch
8
9
5
4
3
2
1
10
11
12
7
6 13
13
13