Draw-Tite 75282 MAX-FRAME RECEIVER - Manual

Installation Instructions
Nissan Frontier
Suzuki Equator
Part Numbers:
75282
44526
87539
Bumper
75990 UHAUL
Hitch Shown In Proper Position
Do Not Exceed Lower of Towing Vehicle
Manufacturer’s Rating or
Hitch type
Max Gross
Trailer WT (LB)
Max Tongue
WT (LB)
Weight Distributing 8,000 (3 632 Kg) 800 (363 Kg)
i h C i
Equipment Required:
Wrenches: 19mm
Drill Bits: None
Fastener Kit: 75282F
Weight Carrying
Ball Mount
5,000 (2 270 Kg) 750 (341 Kg)
Wiring Access Location: PU3
Frame rail
Existing weldnuts
Vertical plate present
On some models
3
2
1
1 Qty. (6) Hex Bolt M12 x 1.25 x 35mm 3 Qty. (6) Flat Washer
Note: Fasteners typical both sides
1. Raise hitch into position and install fasteners as shown above.
2 Qty. (6) Lock Washer
Tighten all M12 CL8.8 fasteners with torque wrench to 68 Lb.-Ft. (92 N*M)
z 2005, 2007, 2008, 2009, 2011 Cequent Performance Products Sheet 1 of 3 75282N 4-6-11 Rev. G
Note: check hitch frequently, making sure all fasteners and ball are properly tightened. If hitch is removed, plug all holes in trunk pan or other body panels to
prevent entry of water and exhaust fumes. A hitch or ball which has been damaged should be removed and replaced. Observe safety precautions when working
beneath a vehicle and wear eye protection. Do not cut access or attachment holes with a torch.
This product complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C. Regulation V-5
and SAE J684.
Form: F205 Rev A 5-6-05