Analog Way Tetra-VIO - Manual (Page 9)

TETRA VIO Chapter 1 : INTRODUCTION (continued)
1-5. FRONT PANEL DESCRIPTION
ANALOG WAY R
AUXILIARY UNIVERSAL INPUT: Universal (computer and video) input. This input accepts the following sources:
AUDIO L+R: Audio stereo source on 2xRCA connectors.
COMPUTER/TV/HDTV: Computer (RGBHV, RGBS or RGsB) or video (SDTV or HDTV) source with
loopthrough on a HD15 female connector.
Y / Cr / Cb: Component (SDTV or HDTV) sources with loopthrough on 3xRCA female connectors.
R / G / B: RGB video source with loopthrough on 3xRCA female connectors.
S.VIDEO: S.VIDEO (Y/C) source with loopthrough on 2xRCA female connector or on a 4-pin mini
DIN connector.
C.V: Composite Video (PAL, NTSC...) source with loopthrough on a RCA female connector.
CONTROL
 Allows scrolling thru the different menus (in Control mode).
EXIT MENU: Switches between Status and Control mode.
ENTER: Validates a selected item.
INPUT SELECTION
1, 2, 3: Selection of the 3 input sources (short push).
AUX: Selection of the auxiliary input source (short push).
NOTE: A long push (1 second) on the selected input button allows to active the BLACK
function. A black screen is displayed onto the output (the blinking LED indicates that this
function is active). A short push on an INPUT SELECTION button allows to inactive this
function.
ADJUSTMENT
FREEZE: Freezes the displayed output (the FREEZE button turns RED).
CENTERING: Adjusts automatically the image in the centering pattern.
SETUP: Automatic configuration.
PAGE 9