2. input #1 description – Analog Way Tetra-VIO User Manual

Page 12

Chapter 2 : STARTING (continued)

TETRA VIO

2-2. INPUT #1 DESCRIPTION

 CONNECTION:

You can connect to this input one of the following source:
• A composite video source on the Y BNC connector or on the COMPUTER/TV/HDTV HD15 (bottom)
connector.
• A S.VIDEO source on the Y and Cr BNC connectors or on the COMPUTER/TV/HDTV HD15 (bottom)
connector.
• A Component video source (YCrCb or HD-YCrCb) on the Cr, Y and Cb BNC connectors or on the
COMPUTER/TV/HDTV HD15 (bottom) connector.
• A RGBS source on the R, G, B and S BNC connectors or on the COMPUTER/TV/HDTV HD15 (bottom)
connector.
• An analog (RGBHV, RGsB, RGBS) computer source on the HD15 COMPUTER/TV/HDTV (bottom) connector.

 LOOP OUT:

You can connect a control monitor to the HD15 (LOOP OUT) connector. This connector can be used as well with
analog sources connected to the BNC inputs.

 INPUT #1 CONNECTION DIAGRAM:

 HD15 PIN ASSIGNMENT:

SIGNAL COMPUTER (analog)

VIDEO RGB/S

YUV & HDTV (analog)

S.VIDEO (Y/C)

COMPOSITE VIDEO

PIN 1

RED.

Cr / Pr.

C (chrominance).

PIN 2

GREEN.

Y (luminance).

VIDEO (NTSC, PAL...)

PIN 3

BLUE.

Cb / Pb.

PIN 6

RED return.

Cr / Pr return.

C return.

PIN 7

GREEN return.

Y return.

return.

PIN 8

BLUE return.

Cb / Pb return.

PIN 10

GND.

PIN 13

H sync or C sync (S).

C sync (S).

PIN 14

V sync.

HD15 female connector of the device.

PAGE 12