Analog Way Tetra-VIO - Manual (Page 14)

Chapter 2 : STARTING (continued) TETRA VIO
2-5. AUXILIARY INPUT DESCRIPTION
 CONNECTION:
You can connect to this input one of the following source:
• A Composite Video source on the C.V RCA connector or on the COMPUTER/TV/HDTV connector (bottom
HD15).
• A S.VIDEO source on the S.VIDEO connector (bottom 4-pin mini DIN) or on the Y & C connectors (bottom
RCA) or on the COMPUTER/TV/HDTV connector (bottom HD15).
• A Component video source on the Y, Cr & Cb (bottom RCA) connectors or on the COMPUTER/TV/HDTV
connector (bottom HD15).
• A HDTV source on the Y, Cr & Cb (bottom RCA) connectors or on the COMPUTER/TV/HDTV connector
(HD15 bottom).
• A RGBS source on the COMPUTER/TV/HDTV connector (bottom HD15).
• An analog computer source (RGBHV, RGsB or RGBS) on the COMPUTER/TV/HDTV (bottom HD15)
connector.
 LOOP-THROUGH:
You can connect a control monitor to the loop-through connectors (top BNC, 4-pin mini DIN & HD15 connectors).
 CONNECTION DIAGRAM:
ANALOG WAY R
 HD15 PIN ASSIGNMENT:
SIGNAL COMPUTER (analog) RGB/S VIDEO YUV & HDTV (analog) S.VIDEO (Y/C) COMPOSITE VIDEO
PIN 1 RED. RED. Cr / Pr. C (chrominance).
PIN 2 GREEN. GREEN. Y. Y (luminance). VIDEO (NTSC, PAL...)
PIN 3 BLUE. BLUE. Cb / Pb.
PIN 6 RED return. RED return. Cr / Pr return. C return.
PIN 7 GREEN return. GREEN return. Y return. Y return. return.
PIN 8 BLUE return. BLUE return. Cb / Pb return.
PIN 10 GND. GND.
PIN 13 H sync or C sync (S). C sync (S).
PIN 14 V sync.
HD15 female connector of the device.
 AUDIO SOURCE:
You can also connect an AUDIO stereo source on 2xRCA connectors.
5
6
1
15
10
11
PAGE 14