Analog Way Tetra-VIO - Manual (Page 25)

TETRA VIO Chapter 4 : FRONT PANEL DISPLAY MENUS DESCRIPTION (continued)
4-5. FUNCTIONS DESCRIPTION (continued)
[Under / over]
• [Underscan]: Underscan mode. The entire image is visible on the screen. Computer mode is underscan.
• [Overscan]: Overscan mode. The image is displayed about 8 % bigger than in underscan mode, to avoid seeing
the corners and the borders. Standard TV display mode is overscan.
[Brightness]
Brightness adjustment.
[Black level]. Available with a computer source.
Black level adjustment.
[Contrast]. Available with a video source.
Contrast adjustment.
[Color]
Color adjustment.
[Hue]
Hue adjustment (NTSC only)
[Gamma]
Gamma adjustment.
[Flicker filter]
Anti-flicker adjustment.
[Sharpness]
Sharpness adjustment.
[Preset]
Reset all the image parameters to the factory settings.
[AUDIO]
[Input]
[Level]
Audio source adjustment.
[Balance]
Balanced adjustment.
[Output]
[Embedded out.]
Allows embedding analog audio stereo signal into the SD/HD-SDI signals.
[Follow SPDIF]
Allows to follow the SPDIF Input rate even during source switching.
[Mute]
Switch ON or OFF the audio output.
[Master volume]
Audio output adjustment.
[Mode]
Mono or stereo mode selection.
[SPDIF Out rate]
SPDIF output rate selection.
[Analog att.]
Analog attenuation adjustment.
[Preset]
Reset all the audio settings.
PAGE 25