Analog Way Tetra-VIO - Manual (Page 15)

TETRA VIO Chapter 2 : STARTING (continued)
2-6. OUTPUT DESCRIPTION
 CONNECTION:
According to the Output format configuration you may connect one or many of the following devices:
-A Hi-Resolution display device (projector, plasma screen...) to the HD15 connector,
-A video device (TV, VCR...) to the mini DIN (S.VIDEO), BNC (composite PAL/NTSC) or HD15 connectors,
-A DVI display device to the DVI-I connector,
-A digital device to the SD/HD-SDI BNC connectors.
 OUTPUT CONNECTION DIAGRAMS:
• In SDTV output format, the Composite video, S-VIDEO, YUV/RGSB/RGBS, SDI & DVI signals are available
simultaneously (on respectively BNC, mini DIN, HD15, BNC & DVI connectors).
• In EDTV output format, the YUV/RGSB/RGBS, & DVI signals are available simultaneously (on respectively
HD15 & DVI connectors).
• In HDTV output format, the YUV/RGSB/RGBS, SDI & DVI-D YUV/RGB (16-235 or 0-255) signals are
available simultaneously (on respectively HD15, BNC & DVI connectors).
• In Computer output format, the RGBHV/RGBS/RGsB & DVI-D RGB (0-255) signals are available
simultaneously (on respectively HD15 & DVI connectors).
 HD15 PIN ASSIGNMENT:
SIGNAL COMPUTER (analog) RGB/S VIDEO YUV & HDTV (analog)
PIN 1 RED. RED. Cr / Pr.
PIN 2 GREEN. GREEN. Y.
PIN 3 BLUE. BLUE. Cb / Pb.
PIN 6 RED return. RED return. Cr / Pr return.
PIN 7 GREEN return. GREEN return. Y return.
PIN 8 BLUE return. BLUE return. Cb / Pb return.
PIN 10 GND. GND.
PIN 13 H sync or C sync (S). C sync (S). HD15 female connector of the device.
PIN 14 V sync.
1 5
10
15 11
6
PAGE 15