Analog Way Tetra-VIO - Manual (Page 23)

TETRA VIO Chapter 4 : FRONT PANEL DISPLAY MENUS DESCRIPTION (continued)
4-5. FUNCTIONS DESCRIPTION (continued)
[OUTPUT]
[Output Status]
Displays the output status.
[Output format]
Output format selection.
[Output rate]
Output rate selection.
[NTSC pedestal]
NTSC pedestal selection.
[Custom settings]
This function allows customizing one or many output format.
[Genlock tune]
Genlock adjustments
[Genlock H. ph]
This function allows adjusting the genlock horizontal phase.
[Genlock Sc. ph]
This function allows adjusting the genlock Subcarrier phase.
[Analog type]
Output type selection for the analog output formats.
[DVI type]
Output type selection for the DVI output formats.
[Test pattern]
This function allows displaying a test pattern onto the output.
• [OFF]: No test pattern is displayed.
• [Centering]: Displays onto the output a centering pattern (for position and size adjustments).
• [Grid]: Displays onto the output a grid pattern.
• [Grey scale]: Displays onto the output a grey scale pattern.
• [Color bar]: Displays onto the output a color bar pattern.
• [SMPTE]: Displays onto the output a SMPTE pattern.
• [Burst]: Displays onto the output a burst pattern.
PAGE 23