Analog Way Tetra-VIO - Manual (Page 6)

QUICK START GUIDE - TETRA VIO
TM
ANALOG WAY EDITION : 03/08
CONNECTIONS:
 Turn OFF all of your equipment before connecting.
 Connect the AC power supply cord to the TETRA VIO and to an AC power outlet.
 Connect your computer & video sources to the 3 universal inputs of the TETRA VIO.
- If you need to connect a digital computer source, use the input #2 (DVI-I IN connector).
- Connect your other analog sources to the inputs #1 and AUXILIARY (front panel).
IMPORTANT:
Connect only one source by input.
 Connect your SDI or HDSDI video source to the input #3.
 Connect your Hi-Resolution display device (projector, plasma screen...) to the HD15 connector, or connect your video display device (TV, VCR...) to
the mini DIN (S.VIDEO), BNC (composite PAL/NTSC) or HD15 connectors, or connect your DVI display device to the DVI-I connector, or connect
your digital display device to the SD/HD-SDI BNC connectors.
NOTE:
-In SDTV output format, the Composite video, S-VIDEO, YUV/RGSB/RGBS, SDI & DVI signals are available simultaneously (on
respectively BNC, mini DIN, HD15, BNC & DVI connectors).
-In EDTV output format, the YUV/RGSB/RGBS & DVI signals are available simultaneously (on respectively HD15 & DVI connectors).
-In HDTV output format, the YUV/RGSB/RGBS, SDI & DVI-D YUV/RGB (16-235) signals are available simultaneously (on
respectively HD15, BNC & DVI connectors).
-In Computer output format, the RGBHV/RGBS/RGsB & DVI-D RGB (0-255) signals are available simultaneously (on respectively
HD15 & DVI connectors).
 Turn ON the TETRA VIO (rear panel switch). Then turn ON all your input sources and then your display device.
• TETRA VIO connection diagram:
ANALOG WAY R
5
3 3
3
4
2
6
• HD15 connector pin assignment (inputs #1 & AUX - input #2 with the DVI/HD15 adaptor):
SIGNAL COMPUTER (analog) RGB/S VIDEO YUV & HDTV (analog) S.VIDEO (Y/C) COMPOSITE VIDEO
PIN 1 RED. RED. Cr / Pr. C (chrominance).
PIN 2 GREEN. GREEN. Y. Y (luminance). VIDEO (NTSC, PAL...)
PIN 3 BLUE. BLUE. Cb / Pb.
PIN 6 RED return. RED return. Cr / Pr return. C return.
PIN 7 GREEN return. GREEN return. Y return. Y return. return.
PIN 8 BLUE return. BLUE return. Cb / Pb return.
PIN 10 GND. GND.
PIN 13 H sync or C sync (S). C sync (S).
PIN 14 V sync.
SETTINGS:
 We recommend resetting the TETRA VIO to its default values, with the front panel display menu (CONTROL > Default values > Yes) before
proceeding.
 Activate the auto-setting function (Press the SETUP front panel button or select auto-setting with the front panel display menu INPUT > Auto
setting). This function detects automatically the input type of the source connected to the input connectors. Then the device performs an auto-
centering function.
 Select the Input status menu (INPUT > Input status) to verify the correct detection of the type and format of your input source. If a wrong message
is displayed, select manually the type of your input source (INPUT > Input # > Type). Renew the step  for each input connected to the device.
 In case of audio connection, assign the audio input to the needed video input (INPUT > Input # > Audio input).
 Select the output format which corresponds to your display device with the front panel display menu (OUTPUT > Output format).
 Select one of the output rate available with the front panel display menu (OUTPUT > Output rate).
 Select the output type with the front panel display menu (OUTPUT > Analog type & DVI type).
 For each input source connected to the TETRA VIO, make the following adjustments available in the IMAGE menu.
5
6
1
15
10
11