Analog Way QuickVu - Manual (Page 44)

44
7.4 Live
The Live mode is designed for easy live operation of the device after you have created some presets.
On the right, you will find all your saved presets under the tab called “MASTER MEMORIES”.
A simple drag and drop on the screen will load your preset into the screen (Program or
Preview).
If you want to change an input into your preset into the live mode, simply use the left source ribbon and drag
and drop your input into a layer.
You can still use the load master memory to load a master memory from the memory of the device or the
RCS² using the preset tables.
Please click on SAVE MASTER MEMORIES and then choose a number to save the current preset of the unit
into a master memory.
You can load at any moment a frame in the same way into a frame layer.
To activate the QUICK FRAME, simply press the Quick Frame button (located on the right side of each screen).
Remember that a preset saved into a screen with a 1024x768 resolution, will keep its size into a screen of
higher resolution. Therefore, it is best to save preset memories only after you have configured the output
resolution.
You still have access to the LOAD/SAVE/RESET preset feature.
Once your preset is ready to send, use the T-bar, or the TAKE button.
You still have access to STEP BACK button.
7.4 Live