Acer 700 Series - Manual (Page 68)

6-8 AcerRouter 700 Series User Guide
Step 5 Enter the following information:
Rule No.: a number used for identification purposes.
Rule Name: a name by which you will refer to this rule.
Interface: the specific WAN interface this new selection rule will apply
to.
Local IP Address: the IP address(es) of the local devices this new rule
will apply to. You can select a single IP address, a range of IP addresses,
a network, or any IP addresses. The screen may change to show fields
you need to fill out accordingly. For example, if you select range, you will
also see (From) and (To) fields where you need to fill out the starting IP
address and the ending IP address.
Local Port: the port number(s) of the local devices this new rule will
apply to. See Table 7-1 for some examples of TCP/IP port assignments.
Remote IP Address: the IP address(es) of the remote devices this new
rule will apply to. You can select a single IP address, a range of IP
addresses, a network, or any IP addresses. The screen may change to
show fields you need to fill out accordingly. For example, if you select
range, you will also see (From) and (To) fields where you need to fill out
the starting IP address and the ending IP address.
Remote Port: the port number(s) of the remote devices this new rule will
apply to. See Table 7-1 for some examples of TCP/IP port assignments.
If you highlighted an existing entry (by selecting the Select to Edit
button) and clicked Edit instead, a similar screen will display, with all
fields already filled out by you previously. Then you can make changes as
necessary.
If you highlighted an existing entry and clicked Delete instead, the
IP Filter Configuration
Add a new rule
Rule No.
Local Address
CANCEL
Rule Name
Interface
(From)
(To)
Local Port
. . .
Remote Address
Remote Port
APPLY
4
ISP
range
. . .
any
any
any