Acer 700 Series - Manual (Page 44)

3-24 AcerRouter 700 Series User Guide
ction Profiles.
Step 2 Select New from the pull-down menu. If you made more than one sele
ction in the SMART Configuration screen, you will see the Interface
Configuration screen. For example:
Step 3 Select ISDN as the interface, and check Single User Dial-in from the list
of configuration types.
Step 4 Click NEXT to continue and display the Connection Profile Configu
ration screen.
Step 5 Enter the following information:
Profile Name: a name used to identify this profile.
Call Back: if you select No, the Call Back Phone Number box will not
be displayed. If you select Yes, enter the Call Back Phone Number. If
call back is selected, the AcerRouter 700 will disconnect after authen
ticating the dial-in user, and dial the remote user’s call back number to re
connect.
Select a Connection Profile
DELETE
Connection Profile Summary
NEXT
New
Internet access:ISP
Select an interface
Interface Configuration
ISDN
Select a Configuration Type
Single User Dial-in
NEXT
Internet Access
Remote Office Dial-in/Dial-out
Connection Profile Configuration
Incoming Authentication PAP or CHAP
User Name
User Password
CANCEL ADVANCED APPLY
Single-User Dial-in by ISDN
Profile Name
Call Back Yes No
Caller Back Phone Number