Chapter 2 installing the acerrouter 700 – Acer 700 Series User Manual
Page 17
AcerRouter 700 Series User Guide
2-1
2
Chapter
2
Installing the AcerRouter 700
Now you should be ready to connect your AcerRouter 700 to devices on your LAN
and ISDN wall jacks.
Follow these steps to install the AcerRouter 700:
Step 1
Connect the ISDN cable to the wall jack and the ISDN port on the
AcerRouter 700.
Step 2
Connect PCs/Workstations or a hub to the AcerRouter’s Ethernet ports. If
you are connecting a hub, see “Connecting more devices through a Hub to
the AcerRouter 700” later in this chapter.
Step 3
Connect the power supply pack to an electrical outlet and the AcerRouter
700. When everything is connected, turn on the power switch.
Figure 2-1 AcerRouter 700 Connectors
AUX
ISDN
∋
A
∋
B
∋
C
ON
Uplink
LAN 1 LAN 2
LAN 3 LAN 4