CEMB USA N500 - Manual (Page 10)

2 - 2
Ge
neral layout
- buttons for navigating between the pages
When this button is pressed in the setup screen, it confirms the settings selected
and allows going onto the next screen.
Instead, in the Measurement screen, it has the function of starting/stopping the
actual measurement (see 2-4 Start / Stop the acquisition).
N.B.
To facilitate use of the instrument also with the left hand, the
button
is located on both sides of the display.
When this button is pressed, it causes quitting of the current screen with return to
the previous one, without taking into account any changes (or saves) in the settings.
Used for returning to the Main page, from any other page.
- function keys
Each function key is linked to different functions in the various screens. Such
functions are indicated in each individual case by the buttons shown at the bottom
of the display: each function is activated by pressing the function key under it.
In the setup screens they are used for setting the various parameters, each one
being indicated by a number corresponding to that of the function key to be
pressed to modify it.
- tab key
This key can only be used when two graphs are plotted on the same page; when
pressed, it changes the active graph to which the selected functions will be applied.
The active graph can be identified by the symbol located on the right side.