CEMB USA C88 (B) - Manual (Page 19)

I 0709 - 19 GB
4.7.3 - OPPOSITE POSITION ►
The normal balancing condition requires the correction weight to be applied at the top (12 o’clock) when the symbol
is displayed:
Apply the correction weight at the top (12 o’clock)
If OPPOSITE POSITION is enabled, the eventual application position for the bottom weight is also indicated next to
the positioning arrows to facilitate cleaning the rim and the relative application of adhesive weights. The symbol used
is:
Apply the correction weight at the bottom (6 o’clock)
4.7.4 - “SPLIT” CONTROL (HIDDEN WEIGHT) ►
SPLIT is only possible in the event of static unbalance or ALUS external side and is used to hide any adhesive
weights correcting unbalance behind the rim spokes.
To split the unbalance detected in two different positions, proceed as follows :
1. Position static unbalance or ALUS external side in the correction position :
2. Select a spoke close to the 12 o’clock postion to be corrected, more it into the 12 o’clock position and press button
3. Turn the wheel in the rotation direction indicated on the unbalance display, brining the second spoke to the 12
o’clock position and press button .
- Turn the wheel in direction of rotation.
- Turn the wheel in reverse direction of rotation.