CEMB USA C88 (B) - Manual (Page 12)

I 0709 - 12
A
B
GB
4.4 - ► AUTOMATIC LIFT
To balance the wheel:
Move the lift into rest position (down) and hold the spindle open (wheel dismounted, pedal in up position); 1.
The symbol appears on the screen:
2. Mount the wheel on the lift;
3. Press the symbol indicated in Fig. A to start loading (Photo 2);
The message «Wait...» appears on the screen until the wheel has been lifted off the ground.
4. Mount the wheel on the wheel balancer, fi tting it correctly on the adapter;
5. Push the pedal to lock the wheel on the spindle (Photo 3)
WARNING: AFTER PUSHING THE SPINDLE CLOSING PEDAL (WHEEL LOCKING) THE LIFT AUTOMATICALLY MOVES TO
THE REST POSITION (DOWN).
The symbol appears on the screen:
until the rest position has been reached (down).
6. Continue with normal wheel balancing;
7. Press the symbol indicated in Fig. A to return the lift to the top position ready to unload the wheel (Photo 4).
The lift positions with suffi cient force to compensate the weight of the wheel in order to facilitate its unloading
Photo1
Foto 2 Foto 3