Avaya Cajun P550 - Manual (Page 26)

2-18
Chapter 2
Cajun P550/P880 Manager User Guide
Deleting a Hunt Group
To delete a hunt group:
1. Start Cajun P550/P880 Manager. For information about
starting the cajun P550/P880 Manager, refer to "Starting the
Cajun P550/P880 Manager" earlier in this chapter.
2. Select Tools > Link Aggregation.
Or
From the tool bar, click Link Aggregation.
The Hunt Group Configuration dialog box opens in the
System Information and Virtual LAN pane (Figure 2-4).
3. From the Name field, select a hunt group you want to
delete.
4. Click DELETE to delete the hunt group.
CAUTION
You do not receive a confirmation message. To recreate a
hunt group, refer to "Creating a Hunt Group", earlier in this
chapter.
Redistributing Hunt Group Learned Addresses
Redistribute the hunt group learned addresses if you notice that a
particular link has learned too many of the busiest ports.
Redistributing learned addresses causes Media Access Control
(MAC) addresses to be redistributed among the hunt group ports.
1. Start Cajun P550/P880 Manager. For information about
starting the Cajun P550/P880 Manager, refer to "Starting the
Cajun P550/P880 Manager" earlier in this chapter.
2. Select Tools > Link Aggregation.
Or
From the tool bar, click Link Aggregation.
The Hunt Group Configuration dialog box opens in the
System Information and Virtual LAN pane (Figure 2-4).
3. From the Name field, select a hunt group you want to
redistribute.