AVTECH Room Alert 4ER Monitor (RA4E-ES1-RAS) - Manual (Page 28)

4 AVTECH Software Inc.
Additional Screens And Interfaces Room Alert 4E
of radio buttons for toggling between Fahrenheit and Celsius temperature displays. By default, the refresh
interval for the ‘Status’ screen is set to every 60 seconds. To temporarily change this interval, enter a number
of seconds in the ‘Update Every’ fi eld and click outside the fi eld. The default temperature scale displayed
will correspond with the Fahrenheit or Celsius scale selected on the ‘Advanced’ tab of the ‘Settings’ screen.
Below these two rows is the sensor display area. The display for each sensor within the sensor block will
contain the corresponding sensor label for that sensor, as well as a status icon indicating the current alert
status and various other data. The status icon displayed will be a gray circle ‘ ’ if a sensor is connected
although an alert threshold is not set. If an alert threshold is set for a connected sensor and the sensor is
not in an alarm state, the status icon displayed will be a green check ‘ ’. If the connected sensor is in an
alarm state, the status icon displayed will be a red X ‘ ’.