AVTECH Room Alert 4ER Monitor (RA4E-ES1-RAS) - Manual (Page 16)

AVTECH Software Inc.
Confi guration & Setup Screens Room Alert 4E
sending email to an email address, formatted in a way defi ned by the service provider being used for the
target mobile device.
For example, Verizon’s email address format for sending an email alert to a mobile device using
SMS text messaging is ‘<10 digit mobile device number>@vtext.com’ with ‘<10 digit mobile device
number>’ being replaced by the area code and phone number of the mobile device without dashes,
spaces or a ‘1’ in front of the area code.
If the specifi c format for your service provider is not known, AVTECH provides a database in the
‘Support’ section of the AVTECH.com website that contains the email-to-SMS format for many
available service providers. This is the largest database of this type on the web. However, if your service
provider is not listed, please contact them by phone for the proper format and be sure that the mobile
device being used has text messaging capability enabled. If you learn of a new or changed format, please
email this with your contact information to
[email protected] so we may confi rm it and post it
online for the convenience of other users.
SNMP
The Room Alert 4E unit is fully SNMP compliant and can be monitored by applications capable of
performing an SNMP Query or Get request. The Room Alert 4E unit can also be confi gured to send
SNMP Traps to up to three separate IP addresses when thresholds are exceeded. If another application is
used to monitor the Room Alert 4E unit, be sure to obtain the MIB fi les for the Room Alert 4E unit from
the ‘Downloads’ section of the
AVTECH.com website or the most recent AVTECH Update CD.