AVTECH Room Alert 4ER Monitor (RA4E-ES1-RAS) - Manual (Page 27)

AVTECH Software Inc. 3
Room Alert 4E Additional Screens And Interfaces
About
The Room Alert 4E ‘About’ screen provides general links and contact information for AVTECH sales,
support and websites. The fi rmware version that is currently installed on the Room Alert 4E unit will
also be listed with the date released directly below. The link entitled ‘Click Here To Check For Updates’
can be used to check if the fi rmware version installed on the Room Alert 4E unit is the most current
(requires internet access).
Web Interface
The Room Alert 4E web interface can be used to view current sensor status on the Room Alert 4E unit.
The web interface is accessed by selecting the Room Alert 4E unit in the AVTECH Device Discovery
Utility and clicking the ‘Web’ button or by typing the IP address of the Room Alert 4E unit in the
location bar of a web browser, once it has been installed properly on your network.
NOTE: If the ‘Loading Sensor Data’ indicator remains on the page, be sure that you do not have a proxy or Microsoft ISA
server soliciting traffi c and requests from the Room Alert 4E unit.
Below the menu bar on the Room Alert 4E is the device name, date and time display, and MAC address display.
NOTE: If the date displayed is ‘2/14/3’, the Room Alert 4E is currently unable to connect to a time server. Please verify that
the network has a connection to the internet and that NTP requests on UDP port 123 are not blocked. If the network does not
have a connection to the internet or use of a local time server is desired, an IP address for a valid NTP time server can be
entered in the ‘Time Server IP’ fi eld on the ‘Advanced’ tab of the ‘Settings’ screen.
To the right of the date and time is the product name and fi rmware version number. This acts as a link that
can be used to determine if the fi rmware version installed on the unit is the most current version. An internet
connection is required for the fi rmware version check. The fi rmware is always current as of the time of
shipment so there is seldom a need to upgrade shortly after purchase of the Room Alert 4E. The exception
would be those occasions where a new version of the fi rmware has just coincidentally been released.
The next row contains a fi eld that can be used to modify the refresh interval of the ‘Status’ screen and a pair