AVTECH Room Alert 4ER Monitor (RA4E-ES1-RAS) - Manual (Page 14)

0 AVTECH Software Inc.
Configuration & Setup Screens Room Alert 4E
Configuration And Setup Screens
Alert Methods
The Room Alert 4E unit can send alert notifications via email and email-to-SMS using anonymous
SMTP relay and/or SNMP Traps. The Room Alert 4E unit is fully SNMP compliant and can be accessed
by any application that can issue a SNMP Get request.
Email
The ‘SMTP Email’ section displays settings to allow Room Alert 4E to send Email Alert Notifications
when alert thresholds are exceeded. In order to enable email alerting from the Room Alert 4E web server
interface, your mail server must have ‘SMTP Relay’ enabled for either your network or the IP address of
the Room Alert 4E ID Box. Contact your Network Administrator if you need assistance in doing this.