Atec PMM-9010_9030_9060 - Manual (Page 18)

PMM 9010 - CISPR 16-1-1 & MIL-STD-461F Compliant
Technical Specifications
Frequency range 10 Hz to 30 MHz
Resolution 0,1 Hz
Reference frequency < 1 ppm
RF input
VSWR
Zin 50
Ω, BNC fem.
10 dB RF att. < 1,2
0 dB RF att. < 2
Attenuator 0 dB to 35 dB (5 dB steps)
Preamplifier gain 20 dB (after preselector)
Pulse limiter Built in (selectable)
Max input level
(without equipment
damage)
137 dBμV (1 W)
Sinewave AC voltage
Pulse spectral density
97 dBμV/MHz
Preselector (One LP and six BP filters)
Frequency ranges < 9 kHz
9 kHz to 150 kHz
150 kHz to 500 kHz
500 kHz to 3 MHz
3 MHz to 10 MHz
10 MHz to 20 MHz
20 MHz to 30 MHz
IF bandwidth
3 dB bandwidth
3, 10, 30, 100, 300 kHz
6 dB bandwidth 0,2 and 9 kHz (CISPR 16-1-1)
10, 100 Hz; 1, 10 kHz (MIL-STD-461)
(100 kHz, 1 MHz MIL-STD-461
when operated with 9030 or 9060)
Noise level 9 - 150 kHz < -8 dBμV (QP)
(Preamplifier ON) (200 Hz BW) < -15 dBμV (AV)
0,15 - 30 MHz < -4 dBμV (QP)
(9 kHz BW) < -10 dBμV (AV)
Detectors Peak, Quasi-Peak, Average,
(simultaneous on PMM RMS, RMS-Average, C-Average,
Emission Suite) APD
Smart Detector function
Level measuring time CISPR 16-1-1 as default
(Hold time) Variable, 1 ms to 30 sec.
Stand-alone display & Marker; marker peak; marker
measure functions to center; highest peaks; move
peak to Analyzer & Manual
modes
Store & Load:
- up to 11 traces (sweep mode)
- two panels
- 4 conversion factors
Built-in limits: CISPR 11, 14, 22
Battery charge and voltage
Display style, contrast, backlight
Click functions (option required)
Display units dBm, dBμV, (dBμA, dBpW, dBμV/m,
dBμA/m by PMM Emission Suite)
Displayed dynamic 80, 100, 120 dB selectable
Spectrum Analyzer mode
Span/division
100 Hz ÷ 3 MHz
Measurement accuracy S/N > 20 dB
10 Hz to 9 kHz ±1,0 dB Typ.
9 kHz to 30 MHz ±1,0 dB
RF output
Tracking & CW Generator
Zout 50
Ω, BNC fem.
Frequency range 10 Hz to 50 MHz
Level 60 to 90 dBμV (0.1 dB step)
Level accuracy
(10 Hz to 30 MHz)
± 0,5 dB
Demodulation AM; volume setting by knob
Autocalibration Internal reference source
I/O Interface RS-232
High Speed Optical (2 channels;
2nd for future extension)
USB Rear
USB Front (future extension)
User Port (drives PMM LISNs)
Bluetooth (optional)
IEEE-488 (optional)
Click meter 1 to 4 simultaneous channels
(Optional) Full compliant to EN 55014-1
Operating temperature 0° to 40°C
Power supply 10 - 15 Vdc, 2.5A
Li-Ion rechargeable plug-in
battery
(8h avg. duration)
AC universal adapter/charger
Dimensions 235x105x335 mm
Weight 4,1 kg