Atec PMM-9010_9030_9060 - Manual (Page 10)

USB 2.0, RS232C, and Bluetooth for PC
communication (GPIB/IEEE-488 via optional
external adapter).
Programmable User Port to control auxiliary
equipment like LISNs and other automatic
equipment.
High-Speed Optic links featuring 2.6 GBps
transfer rate, Bluetooth link, battery charger.
Input and Output
Instruments typically compromise physical
dimensions with display size and type.
Despite its small size, the PMM 9010 features
a sophisticated graphic process that allows
the bright, clear, 16-levels grey backlighted
display to catch and show even the
narrowest peak in the spectrum.
Graphic Display
the receiver can be operated as stand-alone
by the front knob and soft keys through
user-friendly menus, or remotely by a PC
connected via USB or RS232 Serial interface
(Bluetooth optionally).
Controls
for enhanced portability and for field tests,
also offering the major advantage of being
completely disconnected from the mains in
critical analysis, for measurements not
influenced at all in hostile or noisy
environments.
Rechargeable/Replaceable
Internal batteries
as the high frequency receiver can be
mounted directly on top of the EM Clamp
using a suitable Clamp Adapter and a very
short cable connection from the receiver to
the EM Clamp.
This means that the long, movable
connection (usually going to a reel on the
ceiling of the lab and from there to the
receiver) is made with a fibre optic, not with
a coaxial cable which is heavier, thicker, less
flexible, more subject to damage - especially
near to the connectors. Again, mechanical
and electrical advantages for the test
Engineers.
Easier Radiated Power set-up
or any tests where the connection to the
supply network may introduce additional
noise, e.g. due to ground loops - are no
longer a problem with the PMM 9010 / 9030
/ 9060 receivers: they are battery operated
and all share the same model of
rechargeable battery. Easy, clean, fast, simple.
In-situ Tests
“Smart Measure” that can dramatically
speed up the Click test: another productivity
feature by Narda STS.