Atec Agilent-81150A-81160A - Manual (Page 21)

21
Outputs
A selectable single-ended or differential output is provided for each channel on
the front-panel.
Max. frequency
81150A 81160A
High bandwidth amplifi er 120 MHz pulse/240 MHz sine 330 MHz pulse/500 MHz sine
High voltage amplifi er 50 MHz
Out 1/Out 2
81150A 81160A
Output type Single-ended or differential Single-ended or differential
Amplitude (50 Ω into 50 Ω)
High bandwidth amplifi er
1 μHz to 120 MHz
120 MHz to 240 MHz
1 µHz to 330 MHz
330 MHz to 500 MHz
High voltage amplifi er
1 μHz to 50 MHz
50 mV
PP
to 5 V
PP
(1) typ.
50 mV
PP
to 3V
PP
(1) typ.
100 mV
PP
to 10 V
PP
(1) typ.
50 mV
PP
to 5 V
PP
(1) spec.
50 mV
PP
to 3 V
PP
(1) spec.
Amplitude (50 Ω into open, 5 Ω into 50 Ω)
High bandwidth amplifi er
1 μHz to 120 MHz
120 MHz to 240 MHz
1 µHz to 60
High voltage amplifi er
1 μHz to 50 MHz
100 mV
PP
to 10 V
PP
(1) (to 9 V
PP
(2) )
100 mV
PP
to 5 V
PP
(1)
200 mV
PP
to 20 V
PP
(1)
100 mV
PP
to 10 V
PP
(1) (4)
DC amplitude accuracy ± (1.5% of setting + 5 mV) ± (1.5% of setting + 5 mV)
Voltage window (50 Ω into 50 Ω)
High bandwidth amplifi er
High voltage amplifi er
-5 V to +5 V typ.
-10 V to +10 V typ. -5 V to +5 V spec.
Voltage window (50 Ω into open,
5 Ω into 50 Ω)
High bandwidth amplifi er
High voltage amplifi er
-10 V to +10 V (1) (-9 V to +9 V (2) ) typ.
-20 V to +20 V typ.
- 10 V to + 10 V spec. (4)
DC offset accuracy
± 5 V voltage window
± 10 V voltage window
± 20 V voltage window
± (25 mV + 1%)
± (50 mV + 1%)
± (75 mV + 1%) ±(25 mV + 1%)
± (50 mV + 1%)
Resolution 1 mV, 4 digits 1 mV, 4 digits
Output impedance Selectable 50 Ω / 5 Ω typ. 50 Ω nom.
Variable load impedance 0.3 Ω to 1 MΩ (3) 0.1 Ω to 1 MΩ
Protection Short-circuit protected, overload disables
main output Short-circuit protected, overload disables
main output
Connector BNC, front panel BNC, front panel
1) All amplitudes are single-ended amplitudes. Differential peak-peak amplitudes are twice the single-ended value.
2) 10 VPP for 50 Ω into open; 9 VPP for 5 Ω into 50 Ω.
3) Current of normal Out plus current of complement Out is limited to 440 mA per channel.
4) Only for 50 Ω into open.
Main outputs