Atec Agilent-81150A-81160A - Manual (Page 2)

2
• 1 µHz – 120 MHz pulse generation with variable rise/fall time
• 1 µHz – 240 MHz sine waveform output
• 14-bit, 2 GSa/s arbitrary waveforms
• 512k samples deep arbitrary waveform memory per channel
• Pulse, sine, square, ramp, noise and arbitrary waveforms
• Noise, with selectable crest factor, and signal repetition time of 26 days
• FM, AM, PM, PWM, FSK modulation capabilities
• 1 or 2 channel, coupled and uncoupled
• Differential outputs
• Two selectable output amplifi ers:
◦ High bandwidth amplifier
Amplitude: 50 mV
PP
to 5 V
PP
; 50 Ω into 50 Ω
100 mVpp to 10 V
PP
; 50 Ω into open
Voltage window: ± 5 V; 50 Ω into 50 Ω
± 10 V; 50 Ω into open
± 9 V; 5 Ω into 50 Ω
◦ High voltage amplifier
Amplitude: 100 mV
PP
to 10 V
PP
; 50 Ω into 50 Ω,
200 mV
PP
to 20 V
PP
; 5 Ω into 50 Ω, or 50 Ω into open
Voltage window: ± 10 V; 50 Ω into 50 Ω
± 20 V; 5 Ω into 50 Ω or 50 Ω into open
• Glitch free change of timing parameters
(delay, frequency, transition time, width, duty cycle)
• Programming language compatible with Agilent 81101A, 81104A, 81105A,
81110A, 81130A and 81160A
• ISO 17025 and Z540.3 calibration
• LXI class C (rev. 1.1) compliant
• Optional pattern generator:
◦ Ideal and arbitrary bit shaped pattern up to 120 Mbit/s
◦ Two, three or four level signals
◦ PRBS up to 2 31
◦ 16 Mbit pattern memory
◦ Pass through pattern for combined and physical and protocol test up to 10 Mbit/s
The 81150A Pulse Function
Arbitrary Noise Generator
at a Glance
811 A 50