Atec Anritsu-ME7838A - Manual (Page 30)

30 PN: 11410-00593 Rev. D ME7838A BB/mm-Wave VNA TDS
Warranty and Ordering Information VectorStar ME7838A BB/mm-Wave VNA
12.3 ME7838A Waveguide-Band System – Anritsu 3740/41A; OML; VDI mm-Wave Modules
ME7838A Waveguide-band System using Anritsu 3740/41A, OML, or VDI Millimeter-Wave modules:
Action Part Number and Description Additional Information
Choose and order one of the three base
VectorStar models with options listed:
• MS4642A VNA, 10 MHz to 20 GHz
• MS4640A-007 Receiver Offset
• MS4642A-082 or MS4642A-083
MS4642A-083 is ordered when options 051,
061, or 062 are included.
• MS4644A VNA, 10 MHz to 40 GHz
• MS4640A-007 Receiver Offset
• MS4644A-082 or MS4644A-083
MS4644A-083 is ordered when options 051,
061, or 062 are included.
• MS4645A VNA, 10 MHz to 50 GHz
• MS4640A-007 Receiver Offset
• MS4645A-082 or MS4645A-083
MS4645A-083 is ordered when options 051,
061, or 062 are included.
• MS4647A VNA, 10 MHz to 70 GHz
• MS4647A-007 Receiver Offset
• MS4647A-080 or MS4647A-081
MS4647A-081 is ordered when options 051,
061, or 062 are included.
Add options if desired:
• Include Options 051, 061, or 062 Options 061 and 062 include the Active
Measurement Suite
• MS4640A-070 for 70 kHz operation in base
VNA
• MS4640A-002 for Time Domain
Order:
• 3739B mm-Wave test set
• SM6600 Interface Cables for
Anritsu 3740/41A mm-Wave Modules
• SM6537 Interface Cables for
OML/VDI mm-Wave Modules
Does not include DC cable. DC supply is
provided by mm-Wave module power supply.
Choose one of the two appropriate
millimeter-wave module combinations:
• 2 each TxRx transmission and reflection
millimeter-wave modules
Choose appropriate OML or VDI modules.
Contact Anritsu Company for ordering
information.
• 1 each TxRx transmission and reflection
module, and
• 1 each Tx transmission only module
Accessories
SC8215 Kelvin Bias Tee 70 kHz to 110 GHz, Max Voltage: 16 VDC, Max Current: 100 mA
SC7287 Kelvin Bias Tee 100 MHz to 110 GHz, Max Voltage: 50 VDC, Max Current: 500 mA
SC8218 Triax (male) to SMC (male) Cable, (Inner-shield floating at SMC end), 1.5 m (60 in) long
two (2) needed per Kelvin Bias Tee
ML2437A Power Meter, Single Channel, for flat test port power calibration
SC7770 Thermal Sensor, with special characterization, 70 kHz to 70 GHz, V (female)
SM6494 System floor console. Includes larger size writing table
2100-1 GPIB cable, 1 m (39 in) long
2100-2 GPIB cable, 2 m (79 in) long
2100-4 GPIB cable, 4 m (157 in) long
806-206 1.85 mm cable, 61 cm (24 in) long, for connecting the VNA and the 3743A Modules
806-209 1.85 mm cable, 91 cm (36 in) long, for connecting the VNA and the 3743A Modules
01-201 Torque Wrench (for tightening male devices), 8 mm (5/16 in), 0.9 N·m (8 lbf·in)
for SMA, 3.5 mm, 2.4 mm, K, and V connectors
01-202 Universal Test Port Connector Wrench
01-203 Torque Wrench (for tightening the VNA test ports to female devices)
20.6 mm (13/16 in), 0.9 N·m (8 lbf·in)
01-204 Anritsu Stainless Steel Connector Wrench, circular, open-ended
for SMA, 3.5 mm, 2.4 mm, K and V connectors