Mechanical calibration/verification kits – Atec Anritsu-ME7838A User Manual
Page 27
VectorStar ME7838A BB/mm-Wave VNA
Calibration/Verification Kits and Accessories
ME7838A BB/mm-Wave VNA TDS
PN: 11410-00593 Rev. D
27
8. Mechanical Calibration/Verification Kits
Calibration/Verification Kits and Accessories
W1 (1 mm) Calibration/Verification Kit, 3656B
Provides 12-term SOLT or Triple Offset Short calibrations, for W1 (1 mm) devices, and two verification standards.
3656B W1 1 mm Calibration/Verification Kit providing 12-Term SOLT or SSST calibrations and two verification standards.
3656B Cal Kit Contains:
Additional Information (Typical)
Quantity
Part Number
Offset Short W1 (male)
Offset: 2.020 mm
1
23W50-1
Offset Short W1 (male)
Offset: 2.650 mm
1
23W50-2
Offset Short W1 (male)
Offset: 3.180 mm
1
23W50-5
Offset Short W1 (female)
Offset: 2.020 mm
1
23WF50-1
Offset Short W1 (female)
Offset: 2.650 mm
1
23WF50-2
Offset Short W1 (female)
Offset: 3.180 mm
1
23WF50-5
Open W1 (male)
Offset: 1.510 mm
1
24W50
Open W1 (female)
Offset: 1.930 mm
1
24WF50
Fixed Termination W1 (male)
1
28W50
Fixed Termination W1 (female)
1
28WF50
Adapter, W1 (male) to Fixed SC
a
a. SC Connectors are a solution for accurate calibrations for non-insertable 1 mm devices. Users can change the gender of the SC connector
using the provided tool, pin, sliders, and locking keys to ensure the best pin-depth, thus calibrations are valid after changing the gender of the
adapter.
Connector
1
33WSC50
Adapter, W1 (female) to Fixed SC
a
Connector
1
33WFSC50
Interchangeable Slider for SC
a
Connector (male)
1
–
Interchangeable Slider for SC
a
Connector (female)
1
–
Locking Keys for SC
a
Connectors
2
–
Pin Exchange Tool for SC
a
Connectors
Contains 1 male pin
1
01-402
Adapter, W1 (male) to W1 (female)
1
33WWF50
Adapter, W1 (male) to W1 (male)
1
33WW50
Adapter, W1 (female) to W1 (female)
1
33WFWF50
Stepped Impedance Thruline, W1 (male - female)
Verification Device
1
18WWF50-1B
50 O matched Thruline, W1 (male - female)
Verification Device
1
18WWF50-1
Torque Wrench
6 mm, 5.4 N·cm (4 lbf·in)
1
01-504
Open-ended Wrench
6 mm / 7 mm
1
01-505
Coefficients for standards
On USB Memory Device and 3.5 in Floppy Disk
1
–