Atec Agilent-8753E - Manual (Page 8)

8
HP 8753E specifications
1. At 25˚ C ±5˚ C, relative to 0 dBm output power for the HP 8753E, +10 dBm output power
for the HP 8753E Option 011.
2. Typical below 300 kHz.
3. 16 MHz to 3 GHz.
4. 16 MHz to 2 GHz.
5. Typical from 2 to 3 GHz for instruments with Option 075.
6.
+8 dBm with Option 075.
7. Test performed on port 1 only.
Test-port output characteristics 7
Frequency characteristics
Range 30 kHz to 3 GHz (6 GHz with Opt. 006)
Resolution 1 Hz
Stability typically ±7.5 ppm 0° to 55° C
typically ±3 ppm/year
With Option 1D5
typically ±0.05 ppm 0° to 55° C
typically ±0.5 ppm/year
Accuracy ±10 ppm at 25° C ±5° C
Power range –85 to +10 dBm 2,6
Resolution 0.05 dB
Level accuracy 1,2,5 ±1.0 dB
Level linearity 1,2,5 (–15 dBm to +5 dBm) ±0.2 dB
(5 dBm to 10dBm) 6 ±0.5 dB
Impedance 50 Ω; typically
≥16 dB RL (<1.38 SWR) to 3 GHz
≥14 dB RL (<1.50 SWR) to 6 GHz
Spectral purity
2nd harmonic 3 <–25 dBc at 10 6 dBm
<–40 dBc at 0 dBm (typical)
<–50 dBc at –10 dBm (typical)
3rd harmonic 4 <–25 dBc at 10 6 dBm
<–40 dBc at 0 dBm (typical)
<–50 dBc at –10 dBm (typical)
Nonharmonic spurious
Mixer related <–30 dBc at 10 6 dBm (typical)
<–55 dBc at –10 dBm (typical)
Test port input characteristics
Frequency range 30 kHz to 3 GHz (6 GHz with Opt. 006)
Average noise level 2 –82 dBm (3 kHz BW, <3 GHz)
–102 dBm (10 Hz BW, <3 GHz)
–110 dBm (10 Hz BW, <3 GHz) (typical)
–77 dBm (3 kHz BW, 3 to 6 GHz)
–97 dBm (10 Hz BW, 3 to 6 GHz)
–105 dBm (10 Hz BW, 3 to 6 GHz) (typical)
Maximum input level 10 dBm
Damage level 26 dBm or 35 VDC
Impedance, 50 ohms >10 dB RL, 30 kHz to 50 kHz 2
>20 dB RL, 50 kHz to 300 kHz 2
>18 dB RL, 300 kHz to 1.3 GHz
>16 dB RL, 1.3 GHz to 3 GHz
>14 dB RL, 3 GHz to 6 GHz
Frequency response 2,5 ± 1.0 dB, 300 kHz to 3 GHz
(25° + 5° C) ± 2.0 dB, 3 GHz to 6 GHz
Harmonics (Option 002)
2nd harmonic 3 <–15 dBc at +8 dBm
<–35 dBc at 0 dBm (typical)
<–45 dBc at –15 dBm (typical)
3rd harmonic 4 <–30 dBc at +8 dBm
<–50 dBc at 0 dBm (typical)
<–50 dBc at –15 dBm (typical)
Harmonic measurement accuracy (25° ±5° C)
16 MHz to 3 GHz ± 1.5 dB
3 GHz to 6 GHz ± 3 dB (with Opt. 006)
Harmonic measurement dynamic range
–40 dBc (output = –10 dBm,
input = <–15 dBm)
A/D
Frequency
Reference
Synthesizer/
Pulse Gen.
Main
Processor
ROM/RAM
I/O
Front
Panel
Display
HP-IB
Fast
Processor
Phase Lock
Receiver
3.8 to
6.8 GHz
3.8 GHz
Source
4 kHz
RF Out
30 kHz
to 3 GHz
B
A
R
R out R in
1 MHz
HP 8753E block diagram