Atec Agilent-8753E - Manual (Page 7)

7
System performance summary
HP 8753E (75-ohm systems) type-F test ports
1. 90 dB, 30 kHz to 50 kHz.
2. 100 dB, 300 kHz to 16 MHz due to fixed spurs.
3. These measurement uncertainty curves utilize an RSS model for the contribution of random
errors such as noise, typical connector repeatabilities, and test set switch; with a worst-case
model for the contributions of dynamic accuracy and residual systematic errors.
4. The graphs shown for reflection measurements apply to either a one-port device or a two-port
device with more than 6 dB insertion loss.
5. Typical performance.
6. Typical below 300 kHz.
The following specifications describe the system perfor-
mance of the HP 8753E network analyzer with an inte-
grated 75-ohm S-parameter test configuration. System
hardware includes the following:
Network analyzer HP 8753E Option 075
Calibration kit HP 85039B
Test-port cables HP 11857B
Dynamic range
These specifications apply to transmission measurements
in the 30 kHz to 3 GHz frequency range at 10 Hz IF BW
with full two-port error correction. Dynamic range is limit-
ed by maximum receiver input level and the receivers
noise floor.
System dynamic range
30 kHz to 300 kHz 95 dB 1,6
300 kHz to 1.3 GHz 105 dB 2
1.3 GHz to 3 GHz 105 dB
Typical measurement uncertainty 3
The following graphs show the typical measurement
uncertainty for the HP 8753E over the full frequency range
using full two-port error correction.
Transmission measurements
Magnitude
Reflection measurements 4
Magnitude
Measurement port characteristics
The following specifications show the residual HP 8753E
system uncertainties for uncorrected performance and
after accuracy enhancement using full two-port error
correction. These characteristics apply for an environmen-
tal temperature of 25 ± 5° C, with less than 1° C deviation
from the calibration temperature. Data is shown for
type-F female reflection port and type-F male
transmission port.
Frequency Range
Corrected 6 30 kHz-300 kHz 300 kHz-1.3 GHz 1.3 GHz-3 GHz
Directivity 38 dB 38 dB 32 dB
Source Match 36 dB 36 dB 30 dB
Load Match 38 dB 38 dB 32 dB
Reflection tracking ±0.008 dB ±0.008 dB ±0.032 dB
Transmission tracking ±0.062 dB ±0.035 dB ±0.078 dB
Phase
Phase