Atec Agilent-8753E - Manual (Page 24)

Specifications
Input capacitance (at 500 MHz) <0.7 pF (nominal)
Input resistance 1 Megohm (nominal)
Bandwidth 300 kHz to 3 GHz
Gain (at 500 MHz) 0 dB ±1 dB
Frequency response ±1 dB (300 kHz to 1 GHz)
+2, –3 dB, (1 GHz to 3 GHz)
Input voltage for < 1 dB compression
0.3 V
Supplement characteristics
Noise figure < 50 dB (<100 MHz)
< 25 dB (100 MHz to 3 GHz)
Includes HP part/model number
Type-N (m) adapter 11880A
10:1 divider 11881A
Spare 12 mil probes 85024-20012
2.5-inch ground lead 01223-61302
Hook tip 10229
Spanner tip 5060-0549
Probe tip nut driver 8710-1806
HP 8347A RF amplifier
This general purpose broadband amplifier is designed for
maximum reliability and configured for convenience when
interfacing with the HP 8753E. The HP 8347A RF amplifier
delivers increased power across a 300 kHz to 3 GHz
frequency range. Adjustable leveled output power between
+20 dBm (100 mW) to +5 dBm (3.16 mW) can be achieved.
The HP 8347A provides leveled output power without
using an external coupler and detector, since these parts
are built-in. The external ALC can be directly connected
to the External AM input on the HP 8753E. This capability
is especially useful for achieving high dynamic range
measurements at faster sweep rates.
Specifications
Frequency 100 kHz to 3 GHz
Gain 25 dB minimum
Output power (leveled) +5 dBm to +20 dBm
(adjustable)
Maximum output power 24 dBm (typical)
Leveled power flatness ±1.5 dB
Impedance 50 ohms nominal
SWR
Input 2.2:1 max
Output 1.6:1 (ALC on)
Spectral purity
Harmonics –20 dBc at dBm
Third order intercept +30 dBm (nominal)
Typical noise figure 13.5 dB
(100 MHz to 3 GHz)
RF connectors Type-N female
Dimensions 102-mm H x 213-mm
W x 297-mm D
(4.0 in x 8.4 in x 11.7 in)
Weight net 3.5 kg (7.7 lb)
HP 11608A transistor fixture
Provides the capability of completely characterizing
stripline transistors when used with the HP 8753E or the
HP 85046A or HP 85047A S-parameter test sets. A through-
line microstrip and bolt-in grounding structure machinable
for special packages is included.
Specifications
Frequency range DC to 12.4 GHz
Impedance 50 ohms nominal
Return loss > 26 dB to 4 GHz;
> 23 dB, 4 to 8 GHz;
> 19 dB, 8 to 12.4 GHz
Package styles
Option 003 0.205 in diameter packages.
Includes a short circuit termi-
nation and a 50 ohm through-
section for calibration.
Connectors 7-mm precision
HP 85043D systems cabinet
The HP 85043D systems cabinet has been ergonomically
designed specifically for the HP 8753E Option 011 and the
HP 85046A/B or HP 85047A S-parameter test sets. The 132
cm (52-in) system cabinet incudes a bookcase, a drawer,
and a convenient work surface.
Extended dynamic range test configuration
24
HP 8753E accessories, cont’d