Atec Agilent-8753E - Manual (Page 23)

23
HP 8753E accessories, cont’d
Opt 001 type-N (m) on RF input
type-N (f) on outputs
Opt 002 type-N (f) on RF input
precision 7-mm on outputs
Dimensions 46 mm H x 52 mmW x 19 mm D
(1.8 x 2.0 x 0.7 in)
Recommended accessories
HP 11851B RF cable kit
HP 11852B 50 to 75-ohm minimum
loss pad
Frequency range DC to 3.0 GHz
Nominal insertion loss 5.7 dB
Return loss 32 dB (300 kHz to 2 GHz)
27 dB (2 GHz to 3 GHz)
Maximum input power 250 mW (+24 dBm)
Connectors 50-ohm type-N (f) to 75-ohm type-N
(m) standard, 50-ohm type-N (m) to
75-ohm type-N (f) with Option 004
Dimensions 14-mm D x 70-mm L (0.56 in x 2.75 in)
Weight Net 0.1 kg (0.316 lb)
50-ohm accessory kits
The HP 11853A 50-ohm type-N and the HP 11854A
50-ohm BNC accessory kits provide the RF components
generally required when using either the HP 85046A, HP
85047A or the HP 11850C with the HP 8753E Option 011
when measuring devices having 50-ohm type-N or BNC
connectors. These kits are supplied with a storage case.
HP 11853A 50-ohm type-N accessory kit
Includes HP part number
Type-N (f) short HP 11511A
Type-N (m) short HP 11512A
Type-N (m) to N (m) adapter HP 1250-1475
Type-N (f) to N (f) adapter HP 1250-1472
HP 11854A 50-ohm BNC accessory kit
Includes HP part number
Type-N (m) to BNC female adapter 1250-1476
Type-N (m) to BNC male adapter 1250-1473
Type-N (f) to BNC male adapter 1250-1477
Type-N (f) to BNC female adapter 1250-1474
BNC (m) short 1250-0929
75-ohm accessory kits
The HP 11855A 75-ohm type-N and the HP 11856A
75-ohm BNC accessory kits provide the RF components
generally required when using either the HP 85046B
or the HP 11850D power splitter with the HP 8753E Option
011 when measuring devices having 75-ohm type-N or
BNC connectors. These kits are supplied with a storage
case.
HP 11855A 75-ohm type-N accessory kit
Includes HP part number
Type-N (f) short 1250-1531
Type-N (m) short 1250-1530
Type-N (m) to N (m) adapter 1250-1528
Type-N (f) to N (f) adapter 1250-1529
Type-N (m) termination 1250-1532
HP 11856A 75-ohm BNC accessory kit
Includes HP part number
Type-N (m) to BNC (f) adapter 1250-1535
Type-N (m) to BNC (m) adapter 1250-1533
Type-N (m) to BNC (m) adapter 1250-1534
Type-N (f) to BNC (m) adapter 1250-1536
BNC (m) short 1250-0929
BNC (m) termination 11652-60010
RF limiter
Externally attaches to one or both ports of the analyzer. Provides
protection against potential high power transients from external
devices.
Specifications
HP 11930A 7-mm RF limiter
Frequency range DC to 6 GHz
Nominal insertion loss 1.0 dB < 3 GHz
1.5 dB < 6 GHz
Return loss 22 dB < 3 GHz
20 dB < 6 GHz
Maximum input power 3W
Maximum DC 30 V, 350 mA
HP 11930B 50-ohm type-N RF limiter**
Frequency range 5 MHz to 6 GHz
Nominal insertion loss 1.0 dB < 3 GHz*
1.5 dB < 6 GHz
Return loss 21 dB < 3 GHz*
17 dB < 6 GHz
Maximum input power 3W
* Return loss and insertion loss limited below 16 MHz by series
capacitor.
** Internal bias tees cannot be used with this limiter.
HP 85024A high frequency probe
This probe is designed for easy in-circuit sweep measure-
ments. An input capacitance of only 0.7 pF shunted by 1
megohm of resistance permits high frequency probing
without adversely loading the circuit. High probe sensitivi-
ty allows measurements to be made while taking advan-
tage of the full dynamic range of the instrument. Two
probes may be powered directly from the front panel of
the HP 8753E. Refer to technical data sheet #5954-8393.