Atec Agilent-8753E - Manual (Page 3)

3
System performance summary
HP 8753E (50-ohm systems) 7-mm test ports
1. 90 dB, 30 kHz to 50 kHz.
2. 100 dB, 300 kHz to 16 MHz due to fixed spurs.
3. These measurement uncertainty curves utilize an RSS model for the contribution of random
errors such as noise, typical connector repeatabilities, and test set switch; with a worst-case
model for the contributions of dynamic accuracy and residual systematic errors.
4. The graphs shown for reflection measurements apply to either a one-port device or a two-port
device with more than 6 dB insertion loss.
5. Typical performance.
6. Typical below 300 kHz.
The following specifications describe the system perfor-
mance of the HP 8753E network analyzer with an
integrated 50-ohm S-parameter test set configuration.
System hardware includes the following:
Network analyzer HP 8753E Option 006
Calibration kit HP 85031B
Test-port cables HP 11857D
Dynamic range
These specifications apply to transmission measurements
in the 30 kHz to 6 GHz frequency range at 10 Hz IF BW
with full two-port error correction. Dynamic range is limit-
ed by maximum receiver input level and the receiver’s
noise floor.
System dynamic range
30 kHz to 300 kHz 100 dB 1,6
300 kHz to 1.3 GHz 110 dB 2
1.3 GHz to 3 GHz 110 dB
3 GHz to 6 GHz 105 dB
Specified measurement uncertainty 3
The following graphs show the specified measurement
uncertainty for the HP 8753E over the full frequency range
using full two-port error correction.
Transmission measurements
Magnitude
Reflection measurements 4
Magnitude
Measurement port characteristics
The following specifications show the residual HP 8753E
system uncertainties for uncorrected performance and
after accuracy enhancement using full two-port error
correction. These characteristics apply for an environmen-
tal temperature of 25 ± 5° C, with less than 1° C deviation
from the calibration temperature.
Frequency Range
Corrected 30 kHz-300 kHz 5 300 kHz-1.3 GHz 1.3 GHz-3 GHz 3 GHz- 6 GHz
Directivity 55 dB 55 dB 51 dB 46 dB
Source Match 55 dB 51 dB 49 dB 43 dB
Load Match 55 dB 55 dB 51 dB 46 dB
Reflection tracking ±0.001 dB ±0.001 dB ±0.005 dB ±0.020 dB
Transmission tracking ±0.008 dB ±0.006 dB ±0.009 dB ±0.021 dB
Uncorrected 5
Directivity 20 dB* 35 dB 30 dB 25 dB
Source Match 18 dB** 16 dB 16 dB 14 dB
Load Match 20 dB** 18 dB 16 dB 14 dB
Reflection tracking ±2.0 dB ±1.5 dB ±1.5 dB ± 2.5 dB
Transmission tracking ±2.0 dB ±1.5 dB ±1.5 dB ± 2.5 dB
Crosstalk 90 dB 100 dB 100 dB 90 dB
*15 dB, 30 kHz to 50 kHz **10 dB, 30 kHz to 50 kHz
Phase
Phase