Atec Agilent-PNA Series - Manual (Page 9)

9
Uncorrected system performance
Description Specification (dB)
300 kHz to 1 MHz
1 MHz to 1.3 GHz 1.3 GHz to 3 GHz 3 to 6 GHz 6 to 9 GHz
Directivity 30 33 27 20 13
Source match 20 20 17 15 14
Source match (opt. 015) 20 20 15 13 12
Load match 20 20 17 15 15
Load match (opt. 015) 20 20 15 13 13
Reflection tracking ±1.5 ±1.5 ±1.5 ±2.5 ±3.0
Transmission tracking ±1.5 ±1.5 ±1.5 ±2.5 ±3.0
Test port output a
Description Specification Supplemental information
Frequency range
E8356A 300 kHz to 3.0 GHz
E8357A 300 kHz to 6.0 GHz
E8358A 300 kHz to 9.0 GHz
Frequency resolution 1 Hz
CW accuracy ±1 ppm
Frequency stability ±1 ppm, 0° to 40 °C, typical
±0.2 ppm/year, typical
Power level accuracy Variation from 0 dBm in power range 0
300 kHz to 6 GHz ±1.0 dB ±1.5 dB below 10 MHz
6 GHz to 9 GHz ±2.0 dB
Power level linearity
300 kHz to 9 GHz ±0.3 dB –15 to +5 dBm
300 kHz to 1 MHz ±1.0 dB +5 to +10 dBm
1 MHz to 6 GHz ±0.5 dB +5 to +10 dBm
Power level range b
300 kHz to 6 GHz –85 to +10 dBm
6 GHz to 9 GHz –85 to + 5 dBm
Power sweep range
300 kHz to 6 GHz 25 dB
6 GHz to 9 GHz 20 dB
Power level resolution 0.01 dB
Harmonics (2 nd or 3 rd )
at max output power < –25 dBc, characteristic
at 0 dBm output < –35 dBc, typical
at –10 dBm output < –38 dBc, typical, in power range 0
Non-harmonic spurious
at max output power –30 dBc, typical for offset freq > 1 kHz
at –10 dBm output –50 dBc, typical for offset freq > 1 kHz
a. Source output performance on port 1 only. Port 2 output performance is a characteristic.
b. Power to which the source can be set and phase lock is assured.