Atec Agilent-PNA Series - Manual (Page 16)

16
Measurement throughput summary
Cycle time vs. IF bandwidth
a
Instrument state: preset condition, 201 points, CF = 1 GHz,
Span = 100 MHz, correction off, display off. Add 21 ms
for display on. Cycle time includes sweep and re-trace
time.
Cycle time vs. number of points
a
Instrument state: preset condition, 35 kHz IF bandwidth,
CF = 1 GHz, Span = 100 MHz, correction off, display off.
Add 21 ms for display on. Cycle time includes sweep
and re-trace time.
IF bandwidth (Hz) Cycle time (ms)
40,000 8
35,000 9
30,000 11
20,000 13
10,000 28
7,000 36
5,000 48
3,000 72
1,000 196
300 620
100 1875
30 8062
10 17877
Number of points Cycle time (ms)
3 4
11 4
51 5
101 6
201 9
401 16
801 29
1601 52
Cycle time
a,b
(ms)
Number of points
51 201 401 1601
Start 800 MHz, Stop 1000 MHz, 35 kHz IF bandwidth
Uncorrected, 1-port cal
6 10 17 53
2-port cal 18 27 39 113
Start 300 kHz, Stop 3 GHz, 35 kHz IF bandwidth
Uncorrected, 1-port cal
32 43 52 93
2-port cal 73 97 117 201
Start 300 kHz, Stop 6 GHz, 35 kHz IF bandwidth
Uncorrected, 1-port cal
40 50 57 98
2-port cal 88 109 125 210
Start 300 kHz, Stop 9 GHz, 35 kHz IF bandwidth
Uncorrected, 1-port cal
45 55 61 99
2-port cal 99 119 133 212
Time Domainc (increase over uncorrected sweep time)
Conversions
<1 <1 4 13
Gating <1 <1 4 17
a. Typical performance.
b. Includes sweep time, retrace time and band-crossing time. Analyzer display turned off with DISPLAY:ENABLE OFF. Add 21 ms for display on.
Data for one trace (S11) measurement.
c. Option 010 only. Analyzer display turned off with DISPLAY:ENABLE OFF. Add 21 ms for display on.