Atec Agilent-PNA Series - Manual (Page 15)

15
a. A third-wire ground is required.
Description Supplemental Information
External AM input BNC, female; voltage input provides low frequency AM modulation to test port output
signal, or shifts the test port output power to level other than that set by instrument
Input sensitivity 8 dB/volt, typical
Bandwidth 1 kHz, typical
Input impedance 1 k Ω, nominal
Line Power a
Frequency 48 Hz to 66 Hz
Voltage at 115 V setting 90 to 132 VAC; 120 VAC, nominal
Voltage at 220 V setting 198 to 264 VAC; 240 VAC, nominal
VA max 600 VA max
General environmental
RFI/EMI susceptibility Defined by CISPR Pub. 11, Group 1, Class A, and IEC 50082-1
ESD Minimize using static-safe work procedures and an antistatic bench mat
Dust Minimize for optimum reliability
Operating environment
Temperature 0 °C to +40 °C; instrument powers up, phase locks, and displays no error messages
within this temperature range.
Error-corrected temperature range System specifications valid from 25 °C ±5 °C, with less than 1 °C deviation from the
calibration temperature, unless otherwise noted
Humidity 5% to 95% at +40 °C
Altitude 0 to 4500 m (14,760 ft.)
Non-operating storage environment
Temperature -40 °C to +70 °C
Humidity 0 to 90% at +65 °C (non-condensing)
Altitude 0 to 15,240 m (50,000 ft.)
Cabinet dimensions Excludes front and rear protrusions.
Height x Width x Depth 222 x 425 x 426 mm, nominal (8.75 x 16.75 x 16.8 in, nominal)
Weight
Net 24 kg (54 lb), nominal
Shipping 32 kg (70 lb), nominal
General information (continued)