Atec Agilent-8720D - Manual (Page 3)

3
Agilent 8719D, 8720D with 3.5 mm test ports
Standard, Options 400, 012, 089, or any combination of
these options
Calibration kit: Agilent 85052B, 3.5 mm with sliding loads
Cables: Agilent 85131F 3.5 mm flexible cable set
IF bandwidth: 10 Hz
Averaging: None (8 during isolation calibration)
System dynamic range
0.05 to 2 GHz 100 dB 1
2 to 8 GHz 100 dB
8 to 20 GHz 100 dB
1. Rolls off below 840 MHz to 77 dB at 50 MHz
Corrected measurement port characteristics
Frequency Range (GHz)
0.05 to 0.5 0.5 to 2 2 to 8 8 to 20
Directivity 48 dB 48 dB 44 dB 44 dB
Source Match 40 dB 40 dB 33 dB 31 dB
Load Match 48 dB 48 dB 44 dB 44 dB
Reflection Tracking ±0.006 dB ±0.006 dB ±0.006 dB ±0.008 dB
Transmission Tracking ±0.017 dB ±0.018 dB ±0.066 dB ±0.099 dB
Maximum output power
+5 dBm
System performance
Measurement uncertainty
Reflection measurements
Transmission measurements
Magnitude
Magnitude
Phase
Phase