Atec Agilent-8720D - Manual (Page 12)

12
Full frequency band sweep time (ms) 1
Number of Points
Measurement 51 201 401 1601
(Stepped mode/Swept mode)
Single Band Sweep (10 to 12 GHz)
Uncorrected
170/56 523/93 999/143 3866/443
One-port calibration 2 170/56 523/93 999/143 3866/443
Two-port calibration 3 331/100 1053/173 2024/272 7880/872
Agilent 8719D Full Sweep (0.05 to 13.5 GHz)
Uncorrected
612/496 1055/589 1539/651 4371/951
One-port calibration 2 612/496 1055/589 1539/651 4371/951
Two-port calibration 3 1217/977 2118/1166 3100/1287 8911/1892
Agilent 8720D Full Sweep (0.05 to 20 GHz)
Uncorrected
585/447 1068/580 1548/637 4386/939
One-port calibration 2 585/447 1068/580 1548/637 4386/939
Two-port calibration 3 1162/880 2144/1147 3123/1263 8942/1865
Agilent 8722D Full Sweep (0.05 to 40 GHz)
Uncorrected
760/581 1281/696 1733/713 4649/995
One-port calibration 2 760/581 1281/696 1733/713 4649/995
Two-port calibration 3 1510/1144 2572/1376 3497/1414 9478/1976
Time Domain Conversion 4 13 44 90 387
GPIB Data Transfer 5 13 18 25 61
Binary (Internal)
IEEE754 floating point format
32 bit
14 21 31 89
64 bit 16 30 48 153
ASCII 52 181 355 1391
1. All values are typical.
2. S11 one-port calibration, with a 6 kHz IF bandwidth. Includes system retrace time.
Time domain gating is assumed off.
3. S21 measurement with full two-port calibration, using a 6 kHz IF bandwidth.
Includes system retrace time and RF switching time. Time domain gating is
assumed off.
4. Option 010 only, gating and error-correction are off. Does not include sweep time.
5. Measured with an HP Omnibook 5500 133 Pentium computer.
Measurement throughput summary