Alpha Technologies AlphaNet DSM Series DOCSIS - Manual (Page 28)

28 745-814-B0-001, Rev. A
5.0 Upgrading Firmware, continued
5.2
Upgrading XP-DSM Transponder Firmware, continued
5.2.2 Upgrading XP-DSM Firmware Using a DSM Setup File, continued
3. Include in the atidoc01.cfg Setup File the following Alpha MIB parameters and
values:
4. Load the atidoc01.cfg setup file onto the TFTP server.
5. Within 24 hours all XP-DSMs on the network will begin downloading the new
firmware.
Parameter Local Port Parameter Value
atiMgmtSysDownloadReCfgTime [Counters] RECONFIG TIMER 0 (disable automatic upgrade)
atiMgmtSysDownloadTftpAddress [Text] DOWN IP Address of TFTP server
atiMgmtSysDownloadFile1 [Text] DOWN NAME 1 Firmware filename, e.g. “esm1100_.phy”
atiMgmtSysDownloadCtrl [Discretes] GET NEW IMAGE 1 (initiate download of one firmware file)
atiMgmtSysDownloadSysDescr NA Provided with firmware release notes,
e.g. ”ATIP01V1.12.0_”
atiMgmtSysDownloadSysObjectID NA OID embedded in transponder to
ensure firmware compatibility, provided
with release notes