Alpha Technologies AlphaNet DSM Series DOCSIS - Manual (Page 20)

20 745-814-B0-001, Rev. A
3.0 Network Configuration, continued
3.4
The DSM Setup File, continued
3.4.3 Setting Transponder Community Strings with the DSM Setup File
The default transponder read-only community string is AlphaGet. The default read-write
community string is AlphaSet. These community strings are overridden by modem
community strings set in the DOCSIS Configuration File. If the modem is left unsecured
or if operating in Dual IP Mode, the XP-DSM needs to have its community strings
set in the Alpha MIB. This can be done with the DSM Setup File by including the
following parameters:
Parameter Type Description Value
AtiMgmtSnmpCommGet
OID: 1.3.6.1.4.1.926.1.3.1.4.1
Alphanumeric
String
Read Community
String
[desired value]
AtiMgmtSnmpCommSet
OID: 1.3.6.1.4.1.926.1.3.1.4.2
Alphanumeric
String
Read/Write
Community String
[desired value]
Table 3-4, Transponder Community String Parameters