Alpha Technologies FlexPoint AX Series - Manual (Page 5)

5 010-318-C0-007, Rev. G
Safety Notes
Review the drawings and illustrations contained in this manual before proceeding. If there are any questions
regarding the safe installation or operation of the system, contact Alpha Technologies or the nearest Alpha
representative. Save this document for future reference.
To reduce the risk of injury or death, and to ensure the continued safe operation of this product, the following
symbols have been placed throughout this manual. Where these symbols appear, use extra care and
attention.
The use of ATTENTION indicates specifi c regulatory/code requirements that may affect the placement of
equipment and /or installation procedures.
Safety Precautions
• Only qualifi ed personnel may service the system.
• Verify the voltage requirements of the equipment to be protected (load), the AC input voltage to the power
supply (line), and the output voltage of the system prior to installation.
• Verify the utility service panel is equipped with a properly rated circuit breaker for use with this system.
• When connecting the load, DO NOT exceed the output rating of the power supply.
• If batteries are being stored prior to installation, charge at least once every three months to
ensure optimum performance and maximum battery service life.
• The battery pack, which provides backup power, contains dangerous voltages. Only qualifi ed personnel
should inspect or replace batteries.
• In the event of a short-circuit, batteries present a risk of electrical shock and burns from high current .
Observe proper safety precautions.
• Always wear protective clothing, insulated gloves and eye protection (i.e. safety glasses or a face shield)
whenever working with batteries.
• Always carry a supply of water, such as a water jug, to wash the eyes or skin in the event of exposure to
battery
electrolyte.
ATTENTION:
Safety Information
A NOTE provides additional information to help complete a specifi c task or procedure.
NOTE:
The use of CAUTION indicates safety information intended to PREVENT DAMAGE to material or
equipment.
CAUTION!
A WARNING presents safety information to PREVENT INJURY OR DEATH to the
technician or user.
WARNING!