ABUS CASA30500 Operating instructions - Manual (Page 35)

35
English
7.4.6 Time and date settings
Here you set the current time, date, and time zone. These settings are important for proper recording of the
messages in the event log of the main unit.
Activate the “Automatic” setting if your Eycasa main unit is connected to your home network (which provides
access to the internet). The current time is identified automatically via NTP (Network Time Protocol) any
regularly synchronised. Synchronisation takes place once a day or when the Eycasa main unit is restarted.
Set the time zone, regardless of whether manual or automatic setting is selected.
7.4.7 Network settings
Activate the network port of your Eycasa main unit here. This option is deactivated on delivery.
We recommend selecting the DHCP option for internet access (NTP synchronisation). If this causes
problems or there is no DHCP server in the network, you can configure a static IP address instead.
Important:
Settings for the date and time must be made during initial start-up. If the main unit loses
power, the time settings are buffered in the device for about 15 minutes. If your main unit is
separated from the line voltage for a long period of time, the settings must be made again.